Sheet Metal Chassis Frames & Enclosures
Folded, welded and powder-coated sheet metal frames that form the skeleton of an equipment enclosure or machine chassis.
View specificationsDetails
Stamping Parts
Stamped Bracket Assemblies
Multi-part stamped bracket assemblies — pressed channels and webs supplied welded, riveted or fitted with their own inserts.
| Material thickness | 0.5 – 6.0 mm, per drawing |
|---|---|
| Tolerance | ±0.10 mm general, ±0.05 mm on mating features |
| Finish | Zinc plated, powder coated, brushed, passivated |
About this part
What it is and why it is made that way
Some brackets are only useful once their parts are together. This line covers pressed bracket assemblies where a channel, web or face plate is combined into one rigid unit. We supply the assembly welded and dressed, riveted, or fitted with the inserts and hardware the drawing calls for, so it arrives ready to bolt into your build.
- Welded, riveted or insert-fitted to drawing
- Hardware and inserts fitted before delivery where specified
- Assembly-level dimensional control across the joined features
- Supplied individually or in production batches with a serial manifest
Materials
- SPCC / SECC cold-rolled steel
- Stainless 304 / 201 sheet
- Galvanised steel
- Aluminium 5052 / 6061 sheet
Production processes
- Progressive stamping
- Single-bleed stamping
- Laser cutting
- CNC bending
- Welding and assembly
Typical applications
- Welded bracket assemblies
- Rivet-built supports
- Multi-part mounts
- Ready-to-install sub-assemblies
Specification
Technical detail
The ranges below are what this shop typically holds. Anything tighter than the baseline is possible — send the drawing and we will confirm it against your specific tolerances rather than quote from a table.
| Material thickness | 0.5 – 6.0 mm, per drawing |
|---|---|
| Tolerance | ±0.10 mm general, ±0.05 mm on mating features |
| Finish | Zinc plated, powder coated, brushed, passivated |
| Secondary operations | Deburring, tapping, riveting, spot welding, assembly |
| Tooling | Customer-owned tooling accepted; new tooling quoted per project |
| Assembly flatness | ±0.5 mm across the assembly, after joining |
| Joining method | TIG weld, spot weld, rivet or press-fit insert |
| Hardware | Standard or customer-specified fasteners, fitted on request |
Material and finish are yours to choose. The lists above are the families this part is normally made in. We will not substitute a grade or change a tolerance without telling you first — and asking.
In the same process line
Other Stamping parts
If this is not quite your part, these are made on the same equipment with the same inspection.
Stamped Mounting Brackets & Support Arms
Pressed steel mounting brackets and support arms, produced on progressive tools and finished with tapped or welded fixing points.
View specificationsDetails
Stamped Structural Brackets
Formed and pierced structural brackets in cold-rolled and stainless sheet, for load-bearing connections inside an assembly.
View specificationsDetails
Get a quote for this part
Send the drawing and we will quote it against your material, your tolerance and your quantity. One business day, in writing, with a lead time you can plan around.