CNC Machining Parts
Turned and milled parts, machined to the drawing and measured against it.
The catalogue
60 part families across seven process lines. Every one of them is manufactured against a customer drawing, inspected against that drawing, and shipped with the measurement report.
Step one
Choose the process line
If you are not sure which line your part belongs in, that is a normal place to start — send the drawing anyway and we will tell you if you are looking at the wrong process.
Stamping Parts
Pressed sheet metal brackets, panels and chassis, cut and formed on dedicated tools.
Forging Parts
Shafts, flanges, hubs and gear blanks, forged for grain flow and finish-machined for accuracy.
Casting Parts
Sand-cast housings, valve bodies and frames, machined on the faces that matter.
Die Casting Parts
High-pressure die cast housings and manifolds, with the shape formed in the tool.
Precision Casting Parts
Lost-wax castings in stainless, alloy and bronze, for shapes and tolerances sand casting cannot hold.
Plastic & Injection Parts
Injection-moulded fittings, seals, boots and housings, with the fixings moulded in.
Step two
All 60 part families
Filter by process line, or open any part for the materials, tolerances, processes and typical applications we build it from.
Cast Pump & Gearbox Housings
Sand-cast pump and gearbox housings in grey iron and alloy steel, machined on the critical faces to the drawing.
View specificationsDetails
Cast Brackets & Valve Bodies
Cast valve bodies and support brackets in cast iron, with the flow path cored and the sealing faces machined.
View specificationsDetails
Cast Flanges & Manifold Bodies
Cast iron flanges and manifold bodies, drilled and faced to the specified bolt pattern and pressure rating.
View specificationsDetails
Cast Impellers & Fan Housings
Cast impellers and fan housings in cast iron and aluminium, balanced and machined to the specified hub and bore.
View specificationsDetails
Cast Bearing Housings
Cast bearing housings with a bored seat, split or one-piece, machined so the bearing sits concentric in the housing.
View specificationsDetails
Cast Pulleys & Bushings
Cast pulleys, sheaves and bearing bushes, machined at the bore and rim so they run concentric.
View specificationsDetails
Die-Cast Transmission Gears
Die-cast aluminium transmission gears with machined tooth faces, for gearbox and actuator applications.
View specificationsDetails
Die-Cast Gearbox Housings
Die-cast aluminium gearbox housings with the bearing seats and mounting faces machined after casting.
View specificationsDetails
Die-Cast Pump & Gear Housings
Die-cast aluminium pump and gear housings with integral ribs, cast in one shot and machined to the drawing.
View specificationsDetails
Die-Cast Gearbox Covers
Die-cast gearbox covers and end housings, machined at the joint face and at the bearing locations.
View specificationsDetails
Die-Cast Motor End Housings
Die-cast aluminium motor end housings and end bells, machined at the bearing seat and the register fit.
View specificationsDetails
Die-Cast Motor Housings
Die-cast aluminium motor housings with integral cooling fins, machined at the bore, the flange and the end faces.
View specificationsDetails
Die-Cast Pump Casings
Die-cast aluminium pump casings with integral ports and flanges, machined at the seal faces and the bore.
View specificationsDetails
Die-Cast Manifolds & Headers
Die-cast aluminium manifolds and multi-port headers, with the flow paths cast in and the port faces machined.
View specificationsDetails
Die-Cast Hubs & Flange Housings
Die-cast aluminium hubs and flanged housings, with the bore and bolt circle machined to the specified fit and pattern.
View specificationsDetails
Forged Flange Hubs
Forged steel flange hubs with a raised pilot boss, produced closed-die and finish-machined to suit the mating shaft.
View specificationsDetails
Forged Ring Flanges
Forged ring flanges with a full-length sealing face, machined flat and parallel for a reliable gasket line.
View specificationsDetails
Forged Bolt-Circle Flanges
Forged flanges with a dense bolt-hole circle, machined and faced for high-pressure bolted connections.
View specificationsDetails
Forged Sprockets & Gear Rings
Forged steel sprockets and toothed rings, cut and heat-treated for chain drives and indexing systems.
View specificationsDetails
Forged Coupling Hubs
Forged clamping hubs that lock onto a shaft by friction, with a tapered bore finished to the shaft fit.
View specificationsDetails
Forged Gear Rings & Splined Collars
Forged gear rings and splined collars, machined with the tooth or spline profile cut after forging.
View specificationsDetails
Forged Spline Shafts
Forged splined shafts that transmit torque through a form-fit spline, finish-machined and heat-treated to specification.
View specificationsDetails
Forged Spindle & Drive Shafts
Forged steel spindles and drive shafts, stepped and finish-turned with bearing journals, shoulders and threads.
View specificationsDetails
Forged Pins & Shaft Parts
Forged dowel pins, cross pins and shaft components, finish-turned with controlled diameter and concentricity.
View specificationsDetails
Forged Spring Seats & Retainers
Forged spring seats and retainer rings that hold compression springs in position and carry the load into the housing.
View specificationsDetails
Forged Collars & Spacers
Forged collars and spacers that set and hold axial position on a shaft, finished to the bore tolerance you specify.
View specificationsDetails
Forged Flange Plates
Heavy forged flange plates with thick rims, machined on both faces and bored for high-load bolted joints.
View specificationsDetails
CNC Machined Bushings & Housings
CNC machined bushings, blocks and housings — turned and milled to print, with bore and mounting faces held to drawing.
View specificationsDetails
CNC Turned Collars & Nuts
CNC turned collars, nuts and hexagonal fittings, produced on lathes with threads cut and runout controlled.
View specificationsDetails
CNC Machined Sleeves & Bushing Sets
CNC machined sleeves and plain bearings, supplied as single parts or as matched sets with bore sizes logged.
View specificationsDetails
CNC Machined Rings, Pins & Bushings
CNC machined rings, pins and grooved bushings, made to the bore, groove and concentricity the assembly depends on.
View specificationsDetails
CNC Machined Adapters & Fittings
CNC machined adapters, unions and fluid fittings with sealed faces and threads cut to the specified standard.
View specificationsDetails
CNC Machined Fittings & Clamping Bodies
CNC machined clamp bodies and valve fittings, machined from solid with the bore, port and mounting faces held to print.
View specificationsDetails
Injection-Moulded Seals & O-Rings
Injection-moulded seals, gaskets and O-rings in elastomers and engineering plastics, produced in the colour and hardness specified.
View specificationsDetails
Custom Gaskets & Sealing Rings
Flat gaskets and moulded sealing rings cut or moulded to the flange geometry, with the bore and outer diameter held to drawing.
View specificationsDetails
Rubber Bellows & Suction Boots
Moulded rubber bellows and suction boots that protect a moving joint from dust, coolant and impact.
View specificationsDetails
Injection-Moulded Pipe Fittings
Injection-moulded elbows, tees and reducers in ABS and PVC-U, moulded with the specified wall thickness and socket depth.
View specificationsDetails
Injection-Moulded Threaded Fittings
Injection-moulded threaded fittings and hose connectors, with threads moulded to the specified standard and seal detail.
View specificationsDetails
Injection-Moulded Clamps & Brackets
Injection-moulded pipe clamps, saddles and mounting brackets, moulded with the fixing detail already in the part.
View specificationsDetails
Flexible Bellows & Dust Boots
Moulded ribbed bellows and dust boots for linear and rotary motion, made to the stroke they have to accommodate.
View specificationsDetails
Injection-Moulded Caps & Grommets
Injection-moulded end caps, protective covers and cable grommets that close and protect exposed ends and openings.
View specificationsDetails
Injection-Moulded Equipment Housings
Injection-moulded equipment housings and covers, produced with the wall thickness, ribs and fixings specified.
View specificationsDetails
Investment-Cast Bronze Bushings & Fittings
Investment-cast bronze bushings and fittings, with close tolerances and a fine surface finish from the lost-wax process.
View specificationsDetails
Investment-Cast Bronze Brackets
Investment-cast bronze mounting brackets and fittings, with complex forms reproduced faithfully from the model.
View specificationsDetails
Investment-Cast Levers & Linkages
Investment-cast levers and linkage arms in stainless and bronze, with the pivot bores machined to a close tolerance.
View specificationsDetails
Investment-Cast Stainless Fittings
Investment-cast stainless steel fittings, elbows and unions, with sealed faces and threads machined to the specified standard.
View specificationsDetails
Investment-Cast Housings & Mounts
Investment-cast housings and instrument mounts, with thin walls and machined mounting faces where accuracy matters.
View specificationsDetails
Investment-Cast Clamps & Collets
Investment-cast clamps and collets, with the gripping profile machined accurately for a repeatable grip.
View specificationsDetails
Investment-Cast Lever Brackets
Investment-cast lever brackets and handles, with a smooth surface from the mould and machined pivot points.
View specificationsDetails
Investment-Cast Linkage Assemblies
Investment-cast linkage arms and connecting levers, with matched bores so the assembly moves without slop.
View specificationsDetails
Investment-Cast Machined Supports
Investment-cast support brackets and stands, with bosses and mounting faces machined for rigid, repeatable mounting.
View specificationsDetails
Investment-Cast Hub Bodies
Investment-cast hub bodies and coupling hubs, with the bore machined and the web balanced for rotation.
View specificationsDetails
Investment-Cast Mounting Brackets
Investment-cast mounting brackets and standoffs, with fixings machined to position so they land on the tooling holes first time.
View specificationsDetails
Sheet Metal Chassis Frames & Enclosures
Folded, welded and powder-coated sheet metal frames that form the skeleton of an equipment enclosure or machine chassis.
View specificationsDetails
Stamped Mounting Brackets & Support Arms
Pressed steel mounting brackets and support arms, produced on progressive tools and finished with tapped or welded fixing points.
View specificationsDetails
Stamped Structural Brackets
Formed and pierced structural brackets in cold-rolled and stainless sheet, for load-bearing connections inside an assembly.
View specificationsDetails
Stamped Bracket Assemblies
Multi-part stamped bracket assemblies — pressed channels and webs supplied welded, riveted or fitted with their own inserts.
View specificationsDetails
Stamped Reinforcing Brackets
Lightened stamped reinforcing brackets that stiffen a frame without adding dead weight to the finished assembly.
View specificationsDetails
Stamped Channel Brackets
Pressed U- and C-section channel brackets that locate and clamp other parts to a frame edge.
View specificationsDetails
Stamped Lever & Linkage Arms
Pressed steel lever and linkage arms with formed pivot bosses, for low-load mechanical motion across a machine.
View specificationsDetails
No parts match that filter.
Do not see your part?
This catalogue is what we make most often, not the limit of what the workshop can do. If your part is not here, send the drawing and we will tell you whether we can make it.