Investment-Cast Bronze Bushings & Fittings
Investment-cast bronze bushings and fittings, with close tolerances and a fine surface finish from the lost-wax process.
View specificationsDetails
Precision Casting Parts
Investment-Cast Mounting Brackets
Investment-cast mounting brackets and standoffs, with fixings machined to position so they land on the tooling holes first time.
| Part weight | 5 g – 15 kg |
|---|---|
| Dimensional | ±0.05 mm general (to print); ±0.02 mm on critical features |
| Surface | Shot blasted, tumbled, passivated or electropolished |
About this part
What it is and why it is made that way
The reason to replace a stamped bracket with an investment casting is usually tolerance or shape. A casting holds a complex form and holds its position, and the fixing holes are machined after casting so the part drops onto the existing tooling without adjustment.
- Fixing hole positions machined to ±0.05 mm
- Complex form reproduced from the model
- Flatness held on the mounting face
- Stainless and alloy steel grades with certificate
Materials
- Stainless 304 / 316L
- Carbon steel 1045 / 4140
- Alloy steel 17-4PH
- Bronze and brass (CuSn10, CuZn37)
- Aluminium A356
Production processes
- Investment casting (lost wax)
- Lost-wax casting
- Shell moulding
- Deburring and shot blasting
- CNC finish machining
Typical applications
- Precision mounting brackets
- Standoffs and spacers
- Sensor and instrument brackets
- Medical and instrument mounting
Specification
Technical detail
The ranges below are what this shop typically holds. Anything tighter than the baseline is possible — send the drawing and we will confirm it against your specific tolerances rather than quote from a table.
| Part weight | 5 g – 15 kg |
|---|---|
| Dimensional | ±0.05 mm general (to print); ±0.02 mm on critical features |
| Surface | Shot blasted, tumbled, passivated or electropolished |
| Porosity | ≤1% gas porosity on critical surfaces, to agreed specification |
| Inspection | X-ray and dye penetrant testing available on request |
| Hole position | ±0.05 mm from the datum |
| Mounting face flatness | ≤0.10 mm |
| Part weight | 10 g – 4 kg |
Material and finish are yours to choose. The lists above are the families this part is normally made in. We will not substitute a grade or change a tolerance without telling you first — and asking.
In the same process line
Other Precision Casting parts
If this is not quite your part, these are made on the same equipment with the same inspection.
Investment-Cast Bronze Brackets
Investment-cast bronze mounting brackets and fittings, with complex forms reproduced faithfully from the model.
View specificationsDetails
Investment-Cast Levers & Linkages
Investment-cast levers and linkage arms in stainless and bronze, with the pivot bores machined to a close tolerance.
View specificationsDetails
Get a quote for this part
Send the drawing and we will quote it against your material, your tolerance and your quantity. One business day, in writing, with a lead time you can plan around.