CNC Machined Bushings & Housings
CNC machined bushings, blocks and housings — turned and milled to print, with bore and mounting faces held to drawing.
View specificationsDetails
6 part families
CNC Machining Parts
Turned and milled parts, machined to the drawing and measured against it.
What this process is
CNC Machining Parts, in plain terms
CNC machining is the process you use when the tolerance is the specification. We cut the part from solid stock — turned on lathes, milled on machining centres — so the geometry is machined rather than approximated. Every bore, face and thread is measured, and every batch leaves with an inspection report. This is where we send drawings that call for a real accuracy class.
When this is the right answer
- Parts with tight bores, parallel faces or controlled thread fits
- One-off prototypes through to repeat production batches
- Any part where the material and the tolerance both matter
The trade-off. Machining is the most expensive way to make a part per unit — the cost is in the machine time. Below roughly 100 pieces a casting or a stamping often wins on price; above it, the machined version usually costs less than the tooling amortised over the volume.
What we make
6 part families
Each family covers a shape and the way it is normally made. Open one for the materials, the processes and the typical applications behind it.
CNC Turned Collars & Nuts
CNC turned collars, nuts and hexagonal fittings, produced on lathes with threads cut and runout controlled.
View specificationsDetails
CNC Machined Sleeves & Bushing Sets
CNC machined sleeves and plain bearings, supplied as single parts or as matched sets with bore sizes logged.
View specificationsDetails
CNC Machined Rings, Pins & Bushings
CNC machined rings, pins and grooved bushings, made to the bore, groove and concentricity the assembly depends on.
View specificationsDetails
CNC Machined Adapters & Fittings
CNC machined adapters, unions and fluid fittings with sealed faces and threads cut to the specified standard.
View specificationsDetails
CNC Machined Fittings & Clamping Bodies
CNC machined clamp bodies and valve fittings, machined from solid with the bore, port and mounting faces held to print.
View specificationsDetails
Materials we run
- Aluminium 6061-T6 / 7075-T6
- Carbon steel 45# / Q235
- Stainless 304 / 316L
- Copper C360 / brass HPb59-1
- Engineering plastics (POM, nylon, PTFE)
Processes on this line
- 3-axis CNC turning
- 3-axis CNC milling
- 4-axis CNC milling
- 5-axis machining
Industries
Who buys CNC Machining parts
- Industrial automation
- Hydraulics
- Energy
- Medical devices
- General engineering
What to send for a quote
- A drawing — 2D or 3D, STEP or IGES preferred
- Material and surface finish, or the standard you work to
- Quantity per release and the annual forecast
- Tolerance class, and which features are critical
If you only have some of these, send what you have. We will ask for the rest.
Quote your CNC Machining part
Send a drawing and we will quote it against the material, the tolerance and the quantity. One business day for a part we can quote straight away.