Cast Pump & Gearbox Housings
Sand-cast pump and gearbox housings in grey iron and alloy steel, machined on the critical faces to the drawing.
View specificationsDetails
Casting Parts
Cast Flanges & Manifold Bodies
Cast iron flanges and manifold bodies, drilled and faced to the specified bolt pattern and pressure rating.
| Casting weight | 1 – 300 kg per part |
|---|---|
| Tolerance | ±1.5 mm as-cast; ±0.10 mm after machining |
| Casting standard | JB/T 7946 general casting tolerance |
About this part
What it is and why it is made that way
Manifolds and flanges concentrate several flow paths into one body, which is a casting problem rather than a machining one. The bolt pattern is drilled and the faces faced on the same machine so the pattern stays true to the bore, and the material is selected to suit the medium and the temperature.
- Multiple flow paths formed with cores
- Bolt pattern drilled and faces faced in one setup
- Grey iron, ductile iron or alloy cast steel
- Pressure test and dimensional report on request
Materials
- Grey cast iron HT250
- Ductile iron QT500-7
- Alloy cast steel ZG270-500
- Aluminium ADC12 / A356
Production processes
- Sand casting
- Resin sand casting
- Green sand casting
- Core making
- Shot blasting
Typical applications
- Multi-port manifolds
- Pipe flanges and flanged connections
- Pump and valve manifolds
- Cooling water headers
Specification
Technical detail
The ranges below are what this shop typically holds. Anything tighter than the baseline is possible — send the drawing and we will confirm it against your specific tolerances rather than quote from a table.
| Casting weight | 1 – 300 kg per part |
|---|---|
| Tolerance | ±1.5 mm as-cast; ±0.10 mm after machining |
| Casting standard | JB/T 7946 general casting tolerance |
| Machining | Datum-based machining against customer drawings |
| Inspection | Material and dimensional report issued per heat |
| Casting weight | 5 – 200 kg per part |
| Bolt circle | Per drawing, ±0.30 mm position |
| Face flatness | ≤0.20 mm across the flange face |
Material and finish are yours to choose. The lists above are the families this part is normally made in. We will not substitute a grade or change a tolerance without telling you first — and asking.
In the same process line
Other Casting parts
If this is not quite your part, these are made on the same equipment with the same inspection.
Cast Brackets & Valve Bodies
Cast valve bodies and support brackets in cast iron, with the flow path cored and the sealing faces machined.
View specificationsDetails
Cast Impellers & Fan Housings
Cast impellers and fan housings in cast iron and aluminium, balanced and machined to the specified hub and bore.
View specificationsDetails
Get a quote for this part
Send the drawing and we will quote it against your material, your tolerance and your quantity. One business day, in writing, with a lead time you can plan around.